Outdoor Revolution Magnetic Drive Away Awning Strip - 2.7m Long
- 1.00 KGS
- Calculated at Checkout
The Magnetic Band Connector can be used to help connect your Driveaway Awning to a Metallic Roof on a Campervan.
The Kit consists of a 6mm single sided Kador which incorporates a magnetic strip and fig 8 profiles. It works in a similar way to a driveaway kit, you slide the awning cord on your driveaway awning into one side of the fig 8 and slide the magnetic strips kador onto the other side of the fig 8. The Magnetic strip should now attach to any metallic panel you want to attach it to.
NOTE We advise that the magnetic strip works best when used as a secondary fixing in conjunction with straps or guy lines over the roof to help give some additional security to the fixing. Outdoor Revolutions Storm Straps are ideal for this
What the manufacturer Says:-
The Magnetic Drive-away strip is the brand new technology for 2016; the newest form of a drive away kit.
Simply attach the magnetic strip to the top of your vehicle in the desired position, hold the cowl up to the other side of the strip and then thread the figure of 8 strips on to both awning piping. Alternatively thread the awning piping to the strip before magnetising to the vehicles roof.
The magnetic strip has three storm strap loops in which we recommend purchasing some storm straps to secure the magnetic strip.
We recommend using the Magnetic Strip on vehicles with a height range of 180cm - 240cm, the higher the vehicle the harder it is to attach.